TECH SPECS
GENERAL INFORMATION
- Extruder: Single extrusion
- Extruder temperature: Up to 230°C /397°F
- Operating Interface: 3.5” full color IPS touch screen
- Maximum Build Volume: 9” x 5.9” x 5.5” / 230 mm x 150 mm x 140 mm
- Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
- SD Card: Up to 32GB in size /3D20 will not work with SD cards larger than 32GB
- Internal Storage: 4GB
-
Weight(without spool)
- 19 pounds 8 oz (8.845 kg)
-
Dimensions
- Height: 15.7 inches (400 mm)
- Width: 19.1 inches (485 mm)
- Depth: 13.2 inches (335 mm)
FILAMENT
- ONLY builds Dremel PLA filaments
- Filament: 1.75mm PLA (Blodegradable/Renewable)
- All polymers degrade with time. The following conditions ensure the material remains high quality:
- Do not unpack until filament is needed
- Store at room temperature: 16-29° C / 60 - 85° F
- Store in a dry environment
SOFTWARE
- Dremel 3D20 comes with complimentary software. This application converts your 3D digital files into buildable model files.
Windows Requirements
- Dremel® Software runs on 32 and 64-bit Operating Systems Windows Vista or later
MAC OS X Requirements
- Dremel® Software runs on Mac OS X 10.8 or later
Ubuntu Requirements
- Dremel® Software runs on Ubuntu 14.04 or later
HARDWARE
- A PC with the below minimum requirements will be required to run the Dremel® Software
- Processor: Multi-core processor - 2 GHz or faster per core
- System RAM: 2 GB
- Screen Resolution: 1024x768
- USB Port
- Video Graphics Card to support OpenGL 2.1 or later
ELECTRICAL
- 3D20 input rating: 120V, 60Hz, 1.2A
ENVIRONMENT
- Room Temperature: 16-29° C (60 - 85° F)
- Level workspace
- Dry workspace environment
WARRANTY
- One year warranty for non-commercial use
- 60 day warranty for commercial use
- Click here to view the full warranty
